【XTOOL InPlus IK618 Professional Key Programming Tools With the Same Functions as X100 PAD3】Advanced Powerful IMMO Key Programming Tools XTOOL IK618 is an all-in-one car key programming tool that comes with:��Read PIN ��Add transponder key ��smart key/key fob/dealer key ��remote learning, but also with diagnostic functions: ��Advanced ECU Coding ��VAG Guided Functions ��Full Bidirectional Control ��Flash Hidden Functions ��31+ Reset Services ��All Systems Diagnosis ��CAN FD Protocol and ��2 Years Free Updates.

Supported Functions and Models can be Checked on the XTOOL Official Website: Click to Check

Why Do You Need XTOOL IK618 Car Key Programming Tool?

➤ For Brazil, Russian, Malaysia, European Vehicles 

XTOOL IK618 key programming tool is suitable for Brazil Renault, Brazil GM, Brazil FORD, Brazil FIAT, Brazil VAG, etc., For Russia LADA, Russia Renault, etc. For Malaysia Perodua, Malaysia Proton, etc., For European Renault, European Megane and more.

➤ Powerful Key Programming Functions

Packed with comprehensive key programming functions including Backup IMMO data, Check keys number, Read PIN code, Program key, All key lost, Add keys, Generate dealer key, Program remote, Write-enable functions, etc..

➤ KC100 Key Programming and EEPROM Adapter Included

Includes a no-fee KC100 car key programmer and EEPROM adapter (saving up to $300). It allows you to read remote frequency and generate dealer keys for VW, Audi, Fiat, Renault, and Land Rover vehicles.

➤ Full System Diagnostics

XTOOL IK618 key programming tools enable users to explore all accessible systems, and allows to read and clear fault codes, view live data, analyze freeze frame data, and retrieve ECU info.

➤ 31+ Special Functions

Provide 31+ reset services including Oil Reset, EPB Service, SAS Reset, BMS Reset, Throttle Relearn, TPMS Reset, Gearbox Match, ABS Bleeding, Injector Coding, EGR Relearn, A/C Relearn, etc.

➤ Advanced ECU Coding

Allows to code/match the new ECUs and customize the vehicle as required, optimizing specific performance to improve fuel efficiency, reduce power loss, improve durability of mechanical parts, etc.

➤ Full Bi-directional Control

XTOOL IK618 full bi-directional scan tool allows command to be sent to ECUs to perform active tests such as EVAP tests, A/C clutch test, fuel injector test, window/door/sunroof test, etc.

➤ VAG Guided Function

Operate like an intelligent manual, providing step-by-step instructions for complex functions diagnosing in vehicles like VW, Skoda, etc.

➤ CAN FD Protocol

XTOOL IK618 car scan tool supports CAN FD protocols for GM, for GMC, for Cadillac, for Chevrolet, for Buick cars after 2020.

➤ Upgraded Hardware

✔️Android 10.0 systems ✔️7 inch touch screen ✔️5000mAh battery(3.7v) or 2500mAh(7.3v), ✔️1024*600 resolution ✔️Quad-core 1.5GHz processor ✔️one-click WIFI update ✔️2G+64G memory. 2-year free update, ✔️5-year free warranty and ✔️lifetime technical support.

XTOOL IK618 CAR KEY PROGRAMMING TOOLS WITH FULL KEY PROGRAMMING FEATURES

Upgraded Ver. of X100 PADS, XTOOL IK618 key programming tool is packed with full IMMO functions including:

1. Read pincode
2. All key lost
3. Learn Keys
4. Key information
5. Generate dealer key
6. Add smart key
7. Read & Write & Backup EEPROM chip
8. Backup restore IMMO data
9. Check number of keys
10. Program new keys
11. Add keys fob
12. Program remote
13. IMMO ECU Refresh & Coding
14. EEPROM modification
15. Replace ECU
16. Write-enable functions
17. Clear Keys
18. Unlock Key(OEM)
19. and more.

Note : Functions vary by vehicle, please send VIN to verify purchase!

➤WORK WITH KC100 AND EEPROM ADAPTER(BOTH INCLUDED)

XTOOL Inplus IK618 enables you to program keys for for VW/for Audi/for Fiat/for Renaul/for Land Rover, etc with KC100 key programmer. It also allows you to read & write the chip data, data recovery with EEPROM Adapter.

��For Russian local cars: For LADA ,For Renault,X-ray.

��For Brazil local cars: For GM For Renault For Ford For Audi For Fait and For Chevrolet.

��For Europe local cars: For Renault Megane III.

��For Malaysia local cars: For Perodua For Proton.

COMPATIBLE WITH KC501, KS-1, AND MORE PROGRAMMERS

XTOOL IK618 comes standard with the KC-100 key programmer. However, you can choose to purchase KC-501, KS-1, KS-2 key programmers to take its capabilities to the next level.

➤Works with KC501 key programmer (not included):
��For VW 4th, 5th IMMO.
��For Benz Infrared Key Increased.
��Read and write chip.

➤Works with M822 Key Programmer (not included)
��M822 contains the functions of M821
��ALL Key Lost for Toyota 8A/4A chip smart key
��ALL Key Lost for Mercedes-Benz (need with Benz cable).

➤Works with KS1 Key Programmer (not included):
��ALL Key Lost for Toyota Smart Key& Lexus.
��For 2013-2022 Toyota/Lexus models with 8A/4A Chip Smart Keys, Add Key/ All Key Lost, Emergency Start. Frequency & key type reading.

IK618 PROVIDES ECU CODING & SPECIALIZED FUNCTIONS & VAG GUIDED FUNCTION

➤Advanced ECU Coding
For VW, Audi, Skoda, Mercedes-Benz, and Mitsubishi, enabling component matching, adaptive data resets, and the activation of hidden functions to optimize vehicle performance and customize settings.

➤Flash Hidden Functions (ECU Configuration)
For BMW, VW, Audi, Skoda, Toyota, Lexus, Scion, Mazda, Ford, and Lincoln, the IK618 allows activation of higher-level functions and deactivation of annoying features like the seatbelt buzzer, remote window control, and start/stop function.

➤VAG Guided Function
For VW, Audi, and Skoda, the IK618 offers VAG Guided Functions, simplifying complex tasks with step-by-step instructions for key programming and immobilizer functions.

XTOOL IK618 CONDUCTS OE-LEVEL ALL SYSTEM DIAGNOSTIC

IK618 bi-directional scan tool comes with OE level all systems diagnostic capabilities previously found only in dealer tools. It can scan all available systems to perform diagnostics including:

1. Read codes
2. Clear codes
3. View Live data
4. Review Freeze Frame
5. Check ECU Information
6. Active Testing
7. Special Functions

➤ DISPLAY 8-IN-1 LIVE DATA GRAPHING

XTOOL IK618 displays real-time data in a convenient text or graph format, including misfire data, engine RPM, transmission oil temperature, mass air flow sensor data, cylinder balance rates, fuel pressure, and actual versus desired fuel temperature.

FULL BI-DIRECTIONAL CONTROL (ACTIVE TESTS)

XTOOL InPlus IK618 bi-directional scanner is equipped with an active test feature that enables users to send commands directly to the ECU, facilitating the retrieval of information or the initiation of specific tests and functions within the module. The XTOOL InPlus IK618 bi-directional scanner allows you to effortlessly diagnose faults in your vehicle's subsystems, including:

��Injector buzz
��Window/mirror/door lock
��A/C clutch
��ABS pump cycling
��Pump and value tests
��Interior and exterior lights
��Sound horn
and more.

Note: Actuation tests menus displayed vary across vehicles.

31+ RESET FUNCTIONS FOR NECESSARY MAINTENANCE

XTOOL IK618 car diagnostic tool is equipped with a 31+ service options for mechanics, electricians, and automotive repair stores, including:

�� Oil Reset: Once the oil has been changed, the service intervals can be reset and the oil light can be turned off.

�� EPB Reset: Reset brake pads after replacement of brake system.

�� SAS Adjustment: Please perform the calibration of the steering angle sensor.

�� DPF Reset: Please proceed with the diesel particulate filter regeneration process.

�� BMS Reset: Register the new battery to the ECU after replacement.

�� Throttle relearn: This enables the initial settings for the throttle to be adjusted in order to regulate the amount of air intake.

�� ABS bleeding: To remove air from the ABS system, perform the ABS brake bleeding function, which involves cycling the ABS pump.

�� Injector coding: Once the replacement has been made, the injectors should be coded.

The following services are available: TPMS Reset, Gearbox Match, Suspension, Window Initialization, Seat Calibration, A/C Relearn, Headlight, ECU Configuration, A/F settings, Start/Stop Reset, Airbag Repair, Instrument Cluster, Language Change, Transporte Mode, Tire Size Reset, Gear Learning, Power Balance, EEPROM, Coolant Bleeding, etc.

12+ LANGUAGE SUPPORT

XTOOL IK618 auto key programming tool is compatible with 12+ languages. The product is available in the following languages: English, Spanish, German, French, Portuguese, Arabic, Japanese, Polish, Turkish, Russian and Chinese.

Note: If you need to change the language, please provide us the SN number.

IK618 OFFERS QUALITY AND SERVICE GUARANTEE

XTOOL IK618 key programming tool offers a cost-effective hardware parameter, including ✔️Android 10.0 systems, ✔️7 inch touch screen, ✔️5000mAh battery, ✔️1024*600 resolution, ✔️Quad-core 1.5GHz CPU processor, ✔️2G+64G memory. Accompanied by a ✔️two-year free update, ✔️five-year free warranty and ✔️lifetime technical support. IK618 is equipped to handle all key programming capabilities and diagnostic functions.