��Selling Point:

1.Designed specifically for Toyota/Lexus/ Scion
2.19+ special functions
3.Full OBDII testing diagnosis
4.Action Test
5.CANFD
6.Multiple language support
7.Lifetime free updates&lifetime free technical support
8.Auto VIN+ Auto Scan
9.DTC search
10.Full systems diagnosis

��Action Test

XTOOL IP500-TLS provides more than 4,000 active tests for efficient troubleshooting by sending commands to vehicle components during use. Tests include window, wiper, fuel pump and door operation to ensure thorough diagnosis and effective vehicle maintenance. For example, the air conditioning system of Lexus ES 350 does not cool after opening, and the temperature inside the car cannot be reduced. Preliminary inspection found that the air conditioner compressor did not start. IP500 is used for action testing, the device is connected to the car, the device reads the fault code, tests the air conditioning compressor, pressure sensor, refrigerant flow, etc., checks the data flow, confirms the fault, and then goes to the repair shop for repair to avoid high costs.

If you own a Toyota/Lexus/ Scion and have an IP500, you can effectively understand your car's braking system by fully testing the braking and acceleration response, and if there is a problem with insensitive or slow braking, the diagnostic instrument can provide fault codes to help technicians quickly locate the problem and make repairs. This preventative maintenance not only improves the safety of the vehicle, thereby reducing the occurrence of traffic accidents.

Full System Diagnostics

The XTOOL IP500-TLS vehicle diagnostic instrument can scan all electronic control units (ECUs) of Toyota vehicles to ensure comprehensive fault detection, covering multiple systems such as engine, gearbox, ABS, and so on. Users can quickly obtain real-time data and fault codes. XTOOL IP500-TLS provides the function of saving historical fault codes and maintenance records for easy subsequent maintenance. In addition, this method reduces the risk of misjudgment, provides accurate information support through specific fault codes, and makes the judgment more scientific and reasonable.

Multiple language support

The XTOOL IP500 diagnostics tools are available in 15 languages, including English, German, Spanish, French, Polish, Portuguese, Russian, Italian, Turkish, Traditional Chinese, Japanese, Korean, Vietnamese, Arabic and Finnish. This multilingual capability makes it better suited to the needs of Toyota Lexus and Scion owners than other diagnostics that support only nine languages. The XTOOL IP500 provides comprehensive diagnostic support for a wide range of Toyota models to help users resolve a wide range of vehicle faults, improving ease of use and service coverage. With this optimization, the XTOOL IP500 not only enhances the user experience, but also positions itself well in a highly competitive market, becoming an important tool for Toyota 、Lexus and Scion series users.

⏩19+Special Features

The device provides Toyota, Lexus and Scion owners with a variety of commonly used diagnostic and maintenance functions to help them more effectively view and maintain the condition of their vehicle.

1.Oil Light Reset:Resets the oil life indicator after an oil change to ensure that the oil indicator on the dashboard accurately reflects the actual condition.

2.EPB (Electronic Parking Brake) Service: Used for the maintenance and reset of the electronic parking brake system to ensure the normal work of the brake system and improve driving safety.

3.SAS (Steering Angle Sensor) Calibration : Calibrate the steering Angle sensor to ensure the correct operation of the vehicle's steering system and auxiliary systems such as electronic stability program (ESP).

4.DPF (Diesel Particulate Filter) Regeneration : Clean the diesel particulate filter to reduce emissions and maintain engine performance.

5. Throttle Adaptation : Adjust the throttle position sensor to ensure accurate engine intake and optimize driving performance and fuel efficiency.

6.ABS Bleeding : Bleed air from the brake system to ensure the normal operation of ABS (anti-lock brake system) and improve braking safety.

7. Injector Coding The new injector coding ensures compatibility with the engine management system and ensures fuel injection accuracy.

8. Gearbox Match : Rematch the gearbox control unit to optimize shifting logic and ride comfort and improve driving experience.

9. Suspension System Adjustment: Adjust the height and stiffness of the suspension system to optimize ride comfort and handling based on road conditions and personal preferences.

10. Battery Management System (BMS) Reset : Resets the battery management system to ensure proper charging and discharging of the battery and prolong the battery life.

11. Window Initialization : Reset the one-click lift function of the window to ensure smooth
operation of the window switch.

12. Seat Calibration : Calibrate the position memory function of the power seat to ensure accurate repositioning when switching between different drivers.

13. Headlight Calibration: Adjust the Angle and brightness of the headlight to ensure safety and visibility at night.

14. Start/Stop Reset : Reset the start/stop system to ensure a smooth transition between engine stop and start and improve fuel economy.

15. Nox Reset (nitrogen oxide sensor reset) : Reset the nitrogen oxide sensor to ensure that exhaust emissions meet environmental standards.

16. SRS (Supplemental Restraint System) Airbag Reset : Resets the airbag system to ensure normal deployment in the event of a collision and protect the safety of occupants.

17. A/F Settings (Air/Fuel Ratio Settings) : Adjust the air/fuel ratio to optimize combustion efficiency and improve engine performance and fuel economy.

18. A/C Relearn (Air conditioning relearn) : Reset the operating parameters of the air conditioning system to ensure the best cooling and heating effect.

19. EGR (Exhaust Gas Recirculation) Relearn : Reset exhaust gas recirculation system to reduce nitrogen oxide emissions and improve engine efficiency.

With these features, users can perform multiple diagnostic and maintenance operations on their own, eliminating the need for frequent trips to repair shops, saving time and money. At the same time, these features help identify and resolve potential issues in a timely manner, ensuring that the vehicle is always in top condition.

⏩DTC Search

Users can use IP500 DTC search function DTC search function fast and convenient fault code reading, significantly improve the user's identification efficiency of vehicle faults, reduce maintenance costs, enhance driving safety, and improve the user experience, but also with data recording and analysis capabilities, providing important support for vehicle management. It enables users to quickly access and understand vehicle fault information without having to repeatedly search in the browser. By reading fault codes quickly, users can locate the source of the problem in a timely manner, enabling users to take necessary measures before potential problems worsen and avoid greater losses due to delayed repairs.

⏩4 In 1 Real-Time Data Stream & Diagnostic Reports

The XTOO IP500 scann tool will display real-time data in text and graphics such as engine speed, engine coolant temperature, fuel system status, short-term fuel inner layer, low brake level, failure speed sensor, defective ABS module, checked light bulb, worn hydraulic pump, etc. The health report scans all vehicle modules and provides a status list for each module. This diagnostic tool automatically generates diagnostic reports when the diagnostic work is successfully completed. The report is saved to internal memory for later review. Reports can be saved in PDF format, and since the tablet is equipped with WIFI, these reports can be emailed to the office or sent directly to the client.

⏩Auto VIN & Auto Scan

The XTOOL InPlus IP500 is designed to enhance your productivity. With AutoVIN technology, you can identify the brand, model, and year information of your vehicle with just one click. The convenient automatic scanning function will automatically scan all ECUs of the vehicle and detect any fault codes.

⏩One click generation of health reports

The health report will scan all vehicle modules and provide a status list for each module. When the diagnostic task is successfully completed, this diagnostic tool will automatically generate a diagnostic report. The report will be saved to internal memory for future viewing. The reports can be saved in PDF format, and as the tablet is equipped with WIFI and Bluetooth, these reports can be sent to the office via email or directly to the client.

⏩Data Recording and Playback

Allows you to record real-time data streams and view data at a specific point in a targeted manner. This way you can see the data more clearly. After recording for a period of time, if you want to view and analyze the data you just recorded, you need to use the data flow playback function to help you. You can view the data at any time during recording. You can then choose Merge, Report, and Record.

⏩Real-time data sharing

It will allow you to share any data status and content you want to display anytime and anywhere. You can send it to your friends or mechanics to help you solve complex problems

Lifetime Free Updates

XTOOL IP500 obd2 scanner supports lifetime free software upgrades with the latest vehicle data and features and is continuously updated. There are also 24/7 online services and lifetime free technical support.

【PLEASE NOTE】If you encounter any issues regarding compatibility, registration or updates, please do not hesitate to contact us. We will check as soon as possible.

Product Parameters

Warranty: 2 Year Warranty

Updates: Lifetime Free Updates

Protocols: Dual CAN/CANFD

System: Linux System

Storage：128M+32G

Processor：2 Core 1.2GHZ

Resolution：1440*720

Screen：5.45 inches Touch Screen

Battery：3150mAh 3.6V

Charging method: TYPE-C

Package List

1PC X IP500 Tablet

1PC X Diagnostic Main Cable

1PC X Charging Cable

1PC X Quick Boot

1PC X Carton