LAUNCH X431 Creader Elite V2.0 BBA Supports All System Diagnose Function

All Systems Including: ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS System, DPF System, Air Conditioning System, Transmission System..........

Full Diagnostic Function :

-- read fault codes: read and decode the DTCs to identify where the fault location is;
-- clear fault codes: erase the DTCs to turn off the MIL after repairs;
-- retrieve ecu information: allows you to retrieve vehicle information;
-- Graph live data stream: view the dynamic data stream to determine vehicle condition
-- Freeze Frame: it will record the information of the vehicle running status at the moment when the fault occurs to confirm the fault.
-- Vehicle information: such as Vehicle Identification Number (VIN), Calibration Mark (CALID) and Calibration Verification Number (CVN).
-- Online & Offline ECU Coding: generally used for cars after replacing second-hand parts, then it can work .
-- Active Tester (Bi-Directional Control): to test whether the actuators of each system are normal, for analysis
-- Special Function: more than 31+ reset function, like airbag reset, AF Adjustment, DPF reset.........

LAUNCH X431 Creader Elite V2.0 BBA Supports 31+ Reset Service:

*Please note that not all reset functions are supported on all models

* The reset function does not have a separate window interface, it is in the diagnosis function.

1. Steering Angle Reset

Reset the steering angle to zero to keep the car running straight.

2. Injector Coding

Write the new injector code into the car system for the correct cylinder injection quantity.

3. IMMO Reset

Disable any lost keys and add new keys.
**ONLY for cars with an easy IMMO system.

4. DPF Regeneration

Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.

5. A/ C relearn

The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.

6. ABS Bleeding

Help exhaust the air after repair the ABS pump system.

7. AdBlue Reset

Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

8. Throttle Matching

Initialize the throttle actuators to the default state.

9. TPMS Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Tire Reset

Set the size parameters of the modified or replaced tire.

11. AFS Headlamp Reset

Initialize the adaptive headlamp system.

12. Sunroof Initialization

Initialize the sunroof when locked off or closed.

13. Battery Reset

Register the battery after replacement.

14. Seat Calibration

Calibrate the memory in replaced or repaired seats.

15. Oil Reset

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

16. A/ F Reset:

Set or learn Air/ Fuel ratio parameters.

17. GEARBOX LEARN
Help complete the gearbox self-learning to improve gear shifting quality.

18. Transport Mode
Deactivate the transport mode.

19. Windows Calibration
Perform door window matching to recover ECU initial memory.

20. Language Change
Change vehicle system language.

21. Suspension Reset
Adjust the vehicle body height sensor for level calibration.

22. NOx Sensor Reset
Reset catalytic converter learned value stored in ECU.

23. Stop/ Start Reset
Set up the automatic start-stop function in ECU.

24. Coolant Bleeding
Activate the electronic water pump.

25. Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

26.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

..........

LAUNCH X431 Creader Elite V2.0 BBA Lifetime free Update

Update via wifi: Lifetime Free Update For Diagnostic Function + Reset Function

Service : 5 Years Warranty and Lifetime Free Tech support

LAUNCH X431 Creader Elite V2.0 BBA Parameter

• Screen Size: 4 inch Touch Screen
• Resolution: 480*800 pixels
• CPU: 4-core 1.3GHz processor
• RAM: 2GB
• ROM: 16GB
Battery : 3000mAh
• WiFi: 802.11b/g/n 2.4GHz
• USB: TYPE-C
• OBD II Input voltage range: 9~18V
• Power up via: DC 5V data cable or Diagnostic cable through connection to vehicle's DLC
• Working Temperature: -10℃ to 45℃ (14℉ to 113 ℉)
• Storage Temperature: -20℃ to 70℃ (-4℉ to 158 ℉)

LAUNCH X431 Creader Elite V2.0 BBA Packing List

For Mercedes-Benz
For Maybach
For SPRINTER
For BMW
For MINI
For Rolls-Royce
For BMW Brilliance
For Volkswagen
For Audi
For Bentley
For Skoda
For Bugatti
For Lamborghini
For SEAT
For Volkswagen Business Class